A Radial-Dependent Dispersive Finite-Difference Time-Domain Method for the Evaluation of Electromagnetic Cloaks

A radial-dependent dispersive finite-difference time-domain (FDTD) method is proposed to simulate electromagnetic cloaking devices. The Drude dispersion model is applied to model the electromagnetic characteristics of the cloaking medium. Both lossless and lossy cloaking materials are examined and their operating bandwidth is also investigated. It is demonstrated that the perfect "invisibility" from electromagnetic cloaks is only available for lossless metamaterials and within an extremely narrow frequency band.Comment: 18 pages, 10 figure

Multi-Layered Plasmonic Covers for Comb-Like Scattering Response and Optical Tagging

We discuss the potential of multilayered plasmonic particles to tailor the optical scattering response. The interplay of plasmons localized in thin stacked shells realizes peculiar degenerate cloaking and resonant states occurring at arbitrarily close frequencies. These concepts are applied to realize ultrasharp comb-like scattering responses and synthesize staggered, ideally strong super-scattering states closely coupled to invisible states. We demonstrate robustness to material losses and to variations in the background medium, properties that make these structures ideal for optical tagging.Comment: 15 pages, 4 figure

Ground-Plane Quasi-Cloaking for Free Space

Ground-plane cloak designs are presented, which minimize scattering of electromagnetic radiation from metallic objects in the visible spectrum. It is showed that simplified ground-plane cloaks made from only a few blocks of all-dielectric isotropic materials, either embedded in a background medium or in free space, can provide considerable cloaking performance while maintaining their broadband nature. A design which operates isolated in free space that cloaks radiation originating from a specified direction is also analyzed. These schemes should be much easier to be demonstrated experimentally compared to full designs.Comment: 10 pages, 4 figure

Asymmetric control of light at the nanoscale

Breaking reciprocity at the nanoscale can produce directional formation of images due to the asymmetric nonlinear optical response of subwavelength anisotropic resonators. The self-induced passive non-reciprocity has advantages compared to magnet or time modulation approaches and may impact both classical and quantum photonics

FDTD modelling of electromagnetic transformation based devices

PhDDuring this PhD study, several finite-difference time-domain (FDTD) methods were developed to numerically investigate coordinate transformation based metamaterial devices. A novel radially-dependent dispersive FDTD algorithm was proposed and applied to simulate electromagnetic cloaking structures. The proposed method can ac- curately model both lossless and lossy cloaks with ideal or reduced parameters. It was demonstrated that perfect “invisibility” from electromagnetic cloaks is only available for lossless metamaterials and within an extremely narrow frequency band. With a few modifications the method is able to simulate general media, such as concentrators and rotation coatings, which are produced by means of coordinate transformations techniques. The limitations of all these devices were thoroughly studied and explo- red. Finally, more useful cloaking structures were proposed, which can operate over a broad frequency spectrum. Several ways to control and manipulate the loss in the electromagnetic cloak ba- sed on transformation electromagnetics were examined. It was found that, by utili- sing inherent electric and magnetic losses of metamaterials, as well as additional lossy materials, perfect wave absorption can be achieved. These new devices demonstrate super-absorptivity over a moderate wideband range, suitable both for microwave and optical applications. Furthermore, a parallel three-dimensional dispersive FDTD method was introdu- ced to model a plasmonic nanolens. The device has its potential in subwavelength imaging at optical frequencies. The finiteness of such a nano-device and its impact on the system dynamic behaviour was numerically exploited. Lastly, a parallel FDTD method was also used to model another interesting coordinate transformation based device, an optical black hole, which can be characterised as an omnidirectional broad- band absorber

A combined immersed boundary/phase-field method for simulating two-phase pipe flows

The investigation of the flow in a pipe is a major issue for the pipeline capacity but also plays an important role for the control and prevention of phenomena that could damage the pipe, such as corrosion, erosion, and the potential formation of wax or their deposits. Therefore, the characterization of the flow patterns is also a major issue for the prediction of the distribution over the cross-section of the pipe, in order to understand any problems that may interrupt or shut down the operation of the production line. The main purpose of the present effort is to develop an appropriate numerical method for simulating two-phase pipe flows. Advanced Computational Fluid Dynamics (CFD) methods are employed as Navier-Stokes solver, while a Phase-Field method is used to simulate the interfacial region between the two fluids. A Ghost-Cell Immersed Boundary Method (GCIBM) was developed and implemented for the reconstruction of smooth rigid boundaries (pipe wall) based on the work of Tseng and Ferziger (2003). The method was also modified in order to incorporate appropriate boundary conditions for coupling the Phase-Field and Navier-Stokes solvers for two-phase pipe flows. Tseng and Ferziger (2003) used the GCIBM for turbulent single-phase flows; the present modified version comprises a continuation of the method for handling two-phase pipe flows. The computational model is capable of handling large density and viscosity ratios with good accuracy. The developed GCIBM algorithm was validated against analytical solutions for single and two-phase pipe flow, presenting very good agreement. The computational model was compared to available experimental data from the literature for single rising bubbles and bubble coalescence in vertical pipe also with good agreement. The numerical method was used to investigate the lateral wall effects of a 3-D single bubble in a viscous liquid for different pipe diameters and bubble flow regimes. The dynamics of 3-D Taylor bubbles was also examined in vertical pipes for different properties of fluids (e.g. air-water system) and dimensionless parameters relevant to the problem (e.g. ReB, Eo, Mo). The numerical results were compared with available experimental and numerical data from the literature, presenting good agreement.Open Acces